Philips Saeco Presso SUP021YTDR - Manual (Page 10)

10
The machine must be descaled every 2-3 months, when you observe a diminished flow
of water or when the machine signals that descaling is necessary. The machine must
be on; it automatically controls the distribution of the descaling solution.
DESCALING
Warning! Never use vinegar as a descaling agent. You can use any
commercially available non-toxic, non-harmful descaling product for coffee
machines. We recommend using a Saeco descaling agent.
DESCALING
READY FOR USE
DESCALING
READY FOR USE
DESCALING *
SIGNAL.DESCAL.
DESCALING
FILL WATERTANK
MACHINE IS
DESCALING
DESCALING
FINISHED
RINSE MACHINE
FILL WATERTANK
RINSE MACHINE RINSING
FINISHED
DESCALING *
SIGNAL.DESCAL.
SIGNAL.DESCAL. *
TIMER
SIGNAL.DESCAL.
NO
SIGNAL.DESCAL.
YES
SELECT PRODUCT
READY FOR USE
The machine will display
a message when it needs
descaling.
Press the “M” button. Place a large container
under the steam wand.
When the descaling
cycle is completed, close
the knob.
On completing the rinse,
close the knob.
Press the “M” button.
If the desca-
ling cycle is
interrupted, the water
tank and internal
machine circuits must
be rinsed.
For further instructions
on how to clear the
descaling signal, see
chapter on programming.
Remove the cartridge
filter carefully. Fill the
tank with the descaling
solution.
Scroll up or down until the
menu "Descaling" appears
on the top of the display.
Open the steam knob.
The machine will start
descaling.
Rinse out the tank and
fill it with fresh water.
Press the “M” button to
select the function.
Press the “M” button. Use the buttons to view
the following menu.
Press the “M” button
twice.
Open the knob to rinse.
Clear the descaling
signal.
Press “esc” to exit the
descaling function.