Sunrise Medical Quickie P300 User Manual

Page 34

930317 Rev. C

I X .

S E T U P ,

A D J U S T M E N T & U S E

M.CHECK-OUT

Once the wheelchair is assembled and

adjusted, it should roll smoothly and

easily. All accessories should also

perform smoothly.

After the wheelchair has been set up be

sure the chair performs to your specified

operational settings (see pages 35-38). If the

chair does not perform to specifications,

turn the wheelchair OFF immediately and

reprogram operational specifications.
Repeat this procedure until the
wheelchair performs to specifications
before attempting active use of the
wheelchair.

If you have any problems, follow these

procedures:

1. Review the set-up and check-out

section and operating guide to make
sure chair was properly prepared.

2. If your problem persists, contact

your authorized supplier.
If you still have a problem after
contacting your authorized supplier,
contact Sunrise customer service.
See the introduction page for details
on how to contact your authorized
supplier or Sunrise customer service.