SIIG 7.1 - Manual (Page 8)

8
2. Double click Sounds and Multimedia, click Audio
tab.
3. Click Advanced under Sound Playback, then click
the Speakers tab.
4. Select the speaker type from the drop down list.
5. Click OK to save the settings.
Microphone Configuration
Windows 7 / Vista / Server 2008
1. Right click the volume control icon located in the
taskbar by the system clock.
2. Click Playback Devices, under the Playback tab,
select Speakers USB PnP Sound Device, click
Properties.
3. Click the Levels tab. Click the speaker icon to either
enable or mute the microphone as indicated by the
red circle (muted) next to the icon.
4. Move the slider to change the volume level.
5. Click OK to save the changes.
6. Click the Recording tab.
7. Select Microphone USB PnP Sound Device, click
Properties.
8. Click the Levels tab.
9. Move the slider to the left to increase sensitivity.
10. Click OK to save the changes.