Soleus Air KC-18U - Manual (Page 4)

2
1.Set the EXHAUST Control(some models) to CLOSED for maxi-
mum continuous cooling. The EXHAUST Control set to OPEN
positions allows you to draw stale air and/or smoke from the
room.
OPEN-to exhaust room air to the outside.
CLOSED-to circulate room air.
The EXHAUST Control will function only when the FAN CONTROL
is operating.
Operating Your Air Conditioner
Operating your air conditioner properly helps you to obtain the best possible result.
This section explains proper air conditioner operation.
IMPORTANT:
If you turn the air conditioner off, wait at least 3 minutes before turning it back on. This
prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode when outside temperature is
below 65 0 F(18 0 C). The inside evaporator coil will freeze up and the air conditioner will not
operate properly.
Starting your air conditioner
C L O S E D
O P E N
EXHAUST
Your air conditioner has one of these controls:
Your air conditioner has one of these controls:
HIGH
C O O L
M E D
C O O L
L O W
C O O L
OFF
UNIT CONTROL
F A N
ONLY
THERMOSTAT
COLDER
WARMER
7
1
2
4
6
2.Set the UNIT CONTROL to the desired setting.
When the air conditioner is operating at LOW
COOL, MED COOL(some models), or HIGH
COOL, the fan circulates air continuously.
HIGH COOL-for maximum cooling MED COOL
(some models)-for normal cooling LOW
COOL-for sleeping comfort
FAN ONLY
when the FAN ONLY setting is selected, the fan
will run continuously to circulute air, but the air will
not be cooled.
3.Turn the THERMOSTAT Control to a mid-
setting.
Adjust the air conditioner's perfor-mance by turn-
ing the THERMOSTAT Control clockwise ( ) for
maximum cooling. For less cooling,turn the
THERMOSTAT Control counterclockwise ( ).
Experiment and find the setting that best suit your
needs.
5
3
О´ГьГы 1 65 02 12 29 19 54 2