Speco Technologies LPRB922 - Manual (Page 7)

3. Mounting Specifications & Installation Instructions
Please follow the mounting specifications to install the LPRB922 camera.
3.1 Package Contents
Item Description
LPRB922 camera camera assembly
rubber pad static electricity protection
3 insulation tubes static electricity protection
mounting template guide pattern sticker
fo 3 self-tapping screws r mounting camera
3 plastic anchor for cement ceiling mounting
printed material installation guide, notice card
3.2 Mounting Specifications
1. Use appropriate screws and select an appropriate location to install the camera.
2. Ensure the mounting surface can support the weight of the camera.
3. The width of the license plate should cover approximately 17-20% of the width of
the screen.
4. The camera height should be more than 36 inches.
5. The vertical angle should be less than 40 degrees.
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10