Spalding 21196804 - Manual (Page 29)

10/04 P/N 21196804
29
4.
16
B.
A.
C.
3.
A. While holding handle, remove pin (16).
B. Move elevator up or down to desired
height.
C. Replace pin (16) full length to lock
system at desired height.
Apply height adjustment label (35) to front of pole
as shown.
Regulation rim height is 10 feet (3.05 m).
10 ft.
(3.05 m)
2
2
1
3
201251 2/99
HEIGHT ADJUSTMENT
TO ADJUST BACKBOARD:
1. While holding handle, remove pin.
2. Move elevator up or down to
desired height.
3. Replace pin full length to lock
system at desired height.
35
DO NOT ALLOW CHILDREN TO
ADJUST HEIGHT.
WARNING!
Peel protective film
from surface of
acrylic backboard
prior to use.
NOTE: