Sony Ericsson PDW-530P - Manual (Page 110)

Cha
pt
er 7
Sa
v
ing an
d Load
ing Us
er Se
tt
ing Dat
a
110
7-2 Saving and Loading Scene Files
Carry out the procedure from step 3 in 7-2-1 “Saving
a Scene File” on page 107.
The set file ID is saved together with the data.
Selecting the display contents
You can select the items of file information to be displayed
on the SCENE STORE pages (P01 to P20) or the SCENE
RECALL pages (P01 to P20) used for saving data to or
loading data from a “Memory Stick”.
For details, “Selecting the display contents” on page 106.
7-2-2 Loading Scene Files
Proceed as follows.
1
In the TOP menu, select the FILE menu.
2
Turn the MENU knob until the SCENE FILE page
appears, then press the MENU knob to select the page.
Alternatively, on the CONTENTS page select
“SCENE FILE”, and press the MENU knob to display
the SCENE FILE page.
3
Load the scene file.
To load the scene file stored in the camcorder
Turn the MENU knob to move the
b mark to the
desired file number, and press the MENU knob.
The s which is displayed on the left of the file number
changes to x.
The camcorder is set up according to the loaded scene
file.
To cancel the selected scene file
Move the
b mark to x, and press the MENU knob. x
changes to s.
The camcorder returns to the settings before selecting
this scene file.
To load a scene file saved in the “Memory Stick”
Proceed as follows.
1 On the SCENE FILE page, turn the MENU knob to
move the
b mark to “SCENE RECALL”, and press
the MENU knob.
The P00 SCENE RECALL page appears.
2 Turn the MENU knob until the page which
contains the desired file number appears, then press
the MENU knob.
3 Turn the MENU knob to move the b mark to the
desired file number, and press the MENU knob.
The message “RECALL OK? YES bNO”
appears.
4
To carry out the recall, move the b mark to “YES” and
press the MENU knob.
To cancel, press the MENU knob leaving the
b mark
pointing to “NO”.
When the loading is completed, the message
“COMPLETE” appears. The camcorder is set up
according to the loaded scene file.
If no file is present with a particular file number, this
is shown as “NO FILE”.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
04 SCENE FILE
s1 :STANDARD
s2 :STANDARD
s3 :STANDARD
s4 :STANDARD
s5 :STANDARD
sSTANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: SCENE21
TOP
04 SCENE FILE
s1 :SCENE 25
x2 :SCENE 26
s3 :SCENE 27
s4 :SCENE 28
s5 :NO FILE
sSTANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: SCENE21
TOP
?P00 SCENE RECALL
DISPLAY MODE : F.ID
MEM<1>:STANDARD
MEM<2>:STANDARD
MEM<3>:STANDARD
MEM<4>:STANDARD
MEM<5>:NO FILE
ESC
P01 SCENE RECALL
RECALL OK? YES NO
DISPLAY MODE : ALL
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD MEM1-5
ESC