Sharp TINSE1166MPZZ - Manual (Page 13)

ENGLISH
11
E
Affixing the Protection Covers
After installing the monitor, affix the protection covers (4
pieces) as necessary.
Protection
cover
Protection cover
Binding Cables
: Cable clamp attachment
The cables connected to the terminals on the rear of the
monitor can be fastened with the supplied cable clamps.
Insert the cable clamp into the cable clamp attachment on the
rear of the monitor and fasten the cables.
Cable clamp
Cable
Cable clamp
attachment
Removing the Handles
The handles can be removed.
The removed handles can be attached on the side.
Caution
• The removed handles and handle screws are for use with
this monitor. Do not use them for any other devices.
• To attach handles, be sure to use the handles and handle
screws which were removed from the monitor.
• Be sure the handles are attached securely.
Handle
Handle screws