Chapter 2 zone 2 connections, User's manual – Sunfire TGP-5 User Manual

Page 24

User's Manual

CHAPTER 2

Zone 2 connections

Zone 2 can play stereo analog

sources independently of the main
zone, or can play the same source.
Zone 2 can only play a digital source
if the main zone is playing the same
source.

Note that Zone 2 has to be enabled

before it can be used. Please see
page 47 for more details of Zone 2
operation.

This example shows a Sunfi re

TGA-7400 power amplifi er fed from
the TGP-5 Zone 2 stereo outputs.

DVD IN

SAT IN

HDMI OUT

MANUFACTURED

UNDER LICENSE

FROM DIGITAL T

HEATER

SYSTEMS, INC. US PAT. NO. 5,451,

942, 5,956,674, 5,974,380,

5,978,762 AND OTHER WORLD-W

IDE PATENTS ISSUED AND

PENDING. "DTS", "DTS-ES EXTENDED

SURROUND" AND

"NEO:6" ARE TRA

DEMARKS OF DIGITAL THEAT

00, DIGITAL THEATER

SYSTEMS, INC. AL

L RIGHTS RESERVED.

MANUFACTURED U

NDER LICENSE

FROM DOLBY LABO

RATORIES.

"DOLBY", "PRO-LO

GIC" AND THE

DOUBLE-D SYMBOL

ARE

TRADEMARKS OF D

OLBY

LABORATORIES.

MINIMUM SPEAKER

LOAD IMPED

ANCE 4 OHMS

The amplifi er is located near the

TGP-5, and long speaker wires are
run out to your Zone 2 speakers.
These are usually located in another
room or area of your house.

The wire from an optional Infrared

(IR) sensor is shown connected to the
TGP-5 Zone 2 IR input. The TGP-5
is compatible with most makes of IR
sensors and equipment.

The sensor can be located in a

suitable area of Zone 2, allowing you

Connect to an external IR
remote sensor in Zone 2

Analog line-level audio
signals
From: TGP-5 Zone 2 L/R
audio outputs
To: Amplifi er L/R
audio inputs

Speaker-level audio signals
From: Amplifi er speaker outputs
To: Zone 2 speaker inputs

12 VDC trigger voltage
From: TGP-5 Zone 2
12 VDC trigger output
To: Amplifi er 12 VDC
trigger input

complete control of the volume and
source selection. Zone 2 can also be
controlled from the front panel, using
the remote's Zone 2 buttons.

This diagram also shows the TGP-5

12 VDC Zone 2 trigger output con-
nected to the 12 VDC trigger input of
the Sunfi re amplifi er. The amplifi er
automatically turns on whenever Zone
2 is turned on.