Sunfire TGP-5 - Manual (Page 16)

User's Manual
16
CHAPTER 2
DVD IN SAT IN
HDMI OUT MANUFACTURED UN DER LICENSE FROM DIGITAL THEAT ER SYSTEMS, INC . US PAT. NO. 5,451,942, 5,956,674, 5,974,380, 5,978,762 AND OTHE R WORLD-WIDE PAT ENTS ISSUED AND PENDING. "DTS ", "DTS-ES EXT ENDED SUR ROUND" AND "NEO:6" ARE TRADEM ARKS OF DIGITAL T HEATER SYSTEMS, INC . COPYRIGHT 1996, 200 0, DIGITAL TH EATER SYSTEMS, INC . ALL RIGHTS RESERV ED.
MANUFACTURED UND ER LICENSE FROM DOLBY LAB ORATORIES. "DOLBY", "PRO-L OGIC" AND THE DOUBLE-D SYMBO L ARE TRADEMARKS OF DOLB Y LABORATO RIES.
Digital audio and component video connections
If your DVD and TV Monitor both
have com po nent-video, they can be
connected as shown, giving a superior
picture.
The digital output from the DVD
player must be con nect ed to the
digital inputs of the TGP-5. This is the
only way the TGP-5 can receive and
decode Dolby Digital or DTS signals.
It is best to use a coaxial digital cable
to make the connection to the TGP-5,
rather than a standard audio cable.
Digital audio signals
From: DVD Player coaxial
digital audio outputs
To: TGP-5 DVD coaxial
digital audio inputs
Component video signals
From: DVD Player component
video outputs
To: TGP-5 DVD component
video inputs
Component video signals
from TGP-5 Component video outputs
to TV Monitor's Component video inputs
If your DVD or video
component has an
HDMI output, connect
it to one of these inputs
with an HDMI cable
Connect your TV's HDMI input here.
Note: you must also connect the
player's two-channel audio outputs if
you want it to play it in Zone 2 when
the Main Zone is playing a different
source.