Samsung DSB-A100F - Manual (Page 5)

GB-6 D I G I T A L S A T E L L I T E R E C E I V E R GB-7
DSB-A100F
GB
DSB-A100F
DESCRIPTION
1. AC MAINS This is to plug in the AC mains power cord.
The input AC voltage range is 100V to 240V~, 50Hz/60Hz supply.
2. RS 232 DATA PORT This is for connecting your receiver to a computer for reading
and loading data information.
3. DISH INPUT This port is to connect the coaxial cable from LNB of your dish.
The IF input is provided through this port and the input frequency range
is 950-2150 MHz. Also the voltage switching 13 V and 18 V is passed
through this port.
4. VIDEO These RCA connectors are used to connect TV or any external video
system.
5. AUDIO R/L These RCA connectors are used to connect TV or any external audio
system.
6. ANT IN This is used to connect your local terrestrial antenna to your TV set.
7. TV This is used to connect your TV through RF cable.
Rear Panel Front Panel
1. This key is for turning the receiver on and Standby.
2. OK This key is for entering and confirming any data to the receiver in the
menu system. This key is for selecting the item. Press while viewing
TV and a list of channels is displayed.
3. , These keys are for changing the channels during watching TV and for
moving the highlight bar for selecting options on the menu.
4. , These keys are for increasing and decreasing the volume level manually
during watching TV and for moving the highlight bar for selecting options
on the menu.
5. 7 Segment Display This LED display will show the current channel number.
While the receiver is in Standby mode, the display will show the current
time.
6. Infrared Sensor This is to receive the IR commands from the Remote Control Unit.
1 6 7 2 5 4 3 2 3 6 4 5 1
DESCRIPTION