Sony STR-DG710 - Manual (Page 75)

75 GB
Ad
dit
iona
l Inf
o
rma
tion
Specifications
Amplifier section
Models of area code CEL, CEK, AU
1)
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
85 W + 85 W
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
100 W + 100 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz,
THD 10%)
140 W/ch
Models of area code SP, TH6
1)
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
70 W + 70 W
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
80 W + 80 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz,
THD 10%)
120 W/ch
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
Frequency response
Analog 10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Inputs
Analog Sensitivity: 500 mV/
50 kohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT Voltage: 500 mV/
10 kohms
SUB WOOFER Voltage: 2 V/1 kohm
Equalizer
Gain levels ±6 dB, 1 dB step
3)
INPUT SHORT (with sound field and equzlizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna Loop antenna
Intermediate frequency
450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p/75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
B
/C
B
: 0.7 Vp-p/75 ohms
P
R
/C
R
: 0.7 Vp-p/75 ohms
80 MHz HD Pass Through
Area code Power requirements
CEL, CEK, SP, TH6 230 V AC, 50 Hz
AU 240 V AC, 50 Hz
Area code Tuning scale
10 kHz step 9 kHz step
CEL, CEK, AU, SP,
TH6 – 531 –
1,602 kHz
continued