Sagem myX3-2 - Manual (Page 75)

72
Troubleshooting
How do I switch to silent mode? Hold key down unless ring tone sounds, when a short touch is enough.
How do I activate zoom? Can be activated only in SMS and WAP screens; hold down key.
How do I remove the envelop that
appears on the screen?
This envelop means that you have written or answer phone.
To remove it, all you need to do is enter the "Messages" menu to read your
messages. The envelop is then deleted.
In the case of a voice message, contact your answer phonebox and let it
guide you.
How do I lift the receiver that
appears on the screen?
This receiver means that you have received answer phone in your message
box. To remove it, call your answer phone.
How do I remove the written
message at the down of the home
page (1 call)
Press the Stop key to return to the home page without messages.
How do I download ring tones? Logon to one of the following site via your computer:
www.planetsagem.com. This site offers to send ring tones to your phone in
the form of an SMS. You can also logon to your operator's site. Once the
SMS has been received, all you have to do is save it: accept the option
"Save messages", the tune will then be added to your list. In addition, you
can logon to some sites by phone.
How do I free up memory to
download my objects (sounds,
images)
Go into the Settings menu, select My objects then delete some objects (too
many).
How can I increase the efficiency of
my phone?
The most efficient actions are as follows:
You can deactivate the backlight (in the menu Settings/Energy saving) or
be carefully where you keep your phone to make sure that the keys can’t be
pressed accidentally because any key press will activate the backlight.
You can deactivate the screensaver or select the activation time to be more
than every 300s (the screensaver uses processing power).
Make sure that you don’t obstruct the antenna with your fingers when using
the phone (see page 14).
No text on the home page (network
name, menu)
Go to the Background/Wallpapers menus and select the option Activate in
Normal screen.
P ROBLEM - S ITUATION A CTIONS
251400892 myX3-2 English.book Page 72 Jeudi, 27. novembre 2003 2:10 14