Sagem myX3-2 - Manual (Page 43)

40
WAP
The GSM parameters to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Call number
- Access mode (digital, analogue or automatic)
In automatic mode access can be gained to the operator's network by a
digital link and by an analogue link to a different network (in roaming).
The GPRS parameters to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press the right programmable
key (Choice) then the APN menu.
Select or add and APN.
Once all the settings have been entered, you can activate the chosen
access provider. Select him from the list. Confirm your choice with OK.
Inactivity time is used to choose the time after which the call is
automatically disconnected if you have forgotten to log off from a service.
Using the Welcome menu, you can log onto your access provider's
WAP site by pressing the right programmable key .
If you are logging onto the GSM network, the @ symbol flashes, the
metering of the cost of the call starts as soon as it stops flashing.
WAP Logging on
The connection to a WAP service
on the GPRS network is not cut if
an incoming call is received. You
can answer the call.
251400892 myX3-2 English.book Page 40 Jeudi, 27. novembre 2003 2:10 14