Sagem myX3-2 - Manual (Page 18)

15
My phone in 5 minutes
Switch on the phone by pressing the Start key. A short display
appears.
If access to the SIM card is protected, the device prompts you to enter
the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card
was issued. These digits do not appear on the screen for security
reasons.
Press the right programmable key
to accept.
If your phone indicates that the SIM is missing, press the Stop key
to switch off your phone and check that the SIM card is correctly installed.
Getting started
You are now ready to use your phone for the first time.
PIN Number
This is your SIM's secret code.
WARNING
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter "**05*".
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and accept.
- Enter your PIN number and accept.
- Enter your PIN number again and accept.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator or your SMC to obtain a new card.
251400892 myX3-2 English.book Page 15 Jeudi, 27. novembre 2003 2:10 14