beautypg.com

Specifications, Amplifier, Dvd player – Sanyo DC-TS750 User Manual

Page 25: Tuner, General, Speaker system

background image

24

SPECIFICATIONS

Amplifier

Main amplifier

Stereo mode

26 W x 2 (at 8 ohms, 10% distortion)

Dolby Digital mode

26 W x 2 (at 8 ohms, 10% distortion, with Centre/Surround/
Subwoofer amplifier off)

Centre amplifier

26 W (at 8 ohms, 10% distortion, with Main/Surround/Subwoofer
amplifier off)

Surround amplifier

26 W x 2 (at 8 ohms, 10% distortion, with Main/Centre/Subwoofer
amplifier off)

Subwoofer amplifier

50 W (at 4 ohms, 10% distortion, with Main/Centre/Surround
amplifier off)

Input:

VIDEO (AUDIO) IN: 500 mV/50 k

Input/Output:

AV EURO/TV (AUDIO) IN (RGB OUT): For Euro-AV/Scart lead

Outputs:

SPEAKERS:

FRONT (L/R): 8

CENTER: 8

SURROUND (L/R): 8

SUBWOOFER: 4

MONITOR OUT:

S-VIDEO:

Y: 1.0 Vp-p (75

)

C: 0.3 Vp-p (75

) PAL, 0.286 Vp-p (75

) NTSC

VIDEO: 1.0 Vp-p (75

)

DVD Player

Type:

DVD video player

Playback standard:

PAL or NTSC

Laser:

Semiconductor laser, wavelength: 650/790 nm
Laser output (Continuous wave max.):

1 mW (DVD)
0.5 mW (CD)

Signal to noise ratio:

More than 105 dB

Harmonic distortion

0.003 %

Wow and flutter:

Below measurable level

Tuner

Reception frequency:

FM: 87.5 - 108 MHz
AM: 522 - 1611 kHz

General

Power requirements:

AC 230 V, 50 Hz

Power consumption:

120 W

1.5 W (standby mode)

Dimensions:

435(W) x 75(H) x 375(D) mm

Weight:

6.4 kg

Speaker system

Front left, Front right, Centre, Surround left and Surround right
speakers (SX-TS750S, magnetic shield)
Unit used:

8 cm cone type, full range

Maximum power handling capacity:

40 W (peak)

Nominal impedance:

8

Dimensions:

125(W) x 105(H) x 112(D) mm

Weight:

0.72 kg/speaker

Subwoofer (SX-TS750W)
Unit used:

13 cm cone type

Maximum power handling capacity:

80 W (peak)

Nominal impedance:

4

Dimensions:

160(W) x 415(H) x 310(D) mm

Weight:

4.9 kg

IMPORTANT INFORMATION
Because its products are subject to continuous improvement, SANYO
reserves the right to modify product designs and specifications without
notice and without incurring any obligation.