Sony CMT-CPX1 - Manual (Page 8)

8 GB
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
CD NX. However, the program is cleared when
you open the disc tray.
• “– –.– –” appears when the total program time
exceeds 100 minutes.
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“AUTO” appears in the display.
3
Press TUNING +/–.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 and 3 of
“Manual tuning preset” (page 9).
4
Press TUNER MEMORY.
The preset number flashes. Perform steps 5
and 6 while the preset number flashes.
5
Press TUNING +/– repeatedly to select
the desired preset number.
6
Press ENTER.
7
Repeat steps 3 through 6 to preset
other stations.
Tuner
Presetting radio stations
REC SLEEP DAILY
PRESET SHUFFLE PROGRAM REPEAT 1 STEREO TUNED AUTO
SYNC
Preset number