Sony CMT-CPX1 - Manual (Page 18)

18 GB
1
Connect audio cords.
See “Hooking up optional
components” on page 17.
2
Press FUNCTION repeatedly until “MD”
or “VIDEO” appears.
Start playing the connected
component.
Tip
If you cannot select “VIDEO” by pressing
FUNCTION repeatedly, turn off the system and then
press ?/1 while holding down FUNCTION on the
unit. The function will change from “MD” to
“VIDEO”, and “VIDEO” will appear in the display. To
change back to “MD”, repeat the same procedure.
However, you cannot switch the MD (VIDEO)
function in Power Saving Mode.
Making a digital recording
1
Connect the digital optical cord.
2
Start recording.
Refer to the operating instructions
provided with connected component.
Note
You can digitally record from the discs only. However,
you cannot record from copy prohibited discs.
Listening to audio from a
connected component Recording on a connected
component