Setting the clock – Sony CMT-CPX1 User Manual
Page 5
Ge
tting Star
te
d
5
GB
FM antenna (Type B)
Note
To prevent noise pickup, keep the antennas away from
the system and other components.
3
Connect the mains lead to mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press ?/1.
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press
.
or
>
repeatedly to set the
hour.
4
Press ENTER.
5
Press
.
or
>
repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press
.
or
>
until “CLOCK” appears,
then press ENTER.
3
Do the same procedures as step 3 to 6
above.
Note
The clock is not displayed in Power Saving Mode.
AM
FM7
5
Ω
CO
AXIA
L
Extend the FM lead
antenna horizontally
AM loop antenna
E
e
e
E
Setting the clock