SIIG II-150 - Manual (Page 6)

6
3. Insert the driver CD, select Install the software
automatically (Recommended) , then click Next,
Next .
4. Click Continue Anyway, then click Finish.
5. Restart Windows to complete the driver installation.
To Verify Windows 2000/XP/2003 Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Double click SCSI and RAID Controllers, then
double click Initio inic1620 S-ATA Adapter.
4. A message This device is working properly is displayed,
the driver has been correctly installed.
Windows Vista ™ (32-bit)
New Windows Vista Installation
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows?, click
Load Driver .
3. Insert driver CD, then click Browse.
4. Double click CD Drive (D:). (change D: to match
your CD-ROM drive letter).
5. Highlight Vista32 folder, then click OK.
6. Select Initio inic1620 S-ATA Adapter
(D:\Vista32\1620.inf), then click Next.
7. Follow on-screen instructions to complete Windows
Vista installation.