Sirius Satellite Radio SIR-CL1 - Manual (Page 7)

6
How to Connect
1. CeNET Cable
Orient the CeNET cable in the direction
shown in the figure and insert it until it is
locked in position. To remove the
CeNET cable, pull it by lightly grasping
the slide cap in your fingers.
2. SIRIUS antenna
Make sure power is “Off”.
Connect a SIRIUS antenna (sold
separately) to the SIRIUS antenna
terminal and press until locking tab
engages.
To disconnect, make sure power is “Off”,
then press the rear of the locking tab
to release.