Sharp AR-M162 - Manual (Page 32)

30
TROUBLESHOOTING AND MAINTENANCE
2 Open and close the SPF.
Opening and closing the cover
clears the misfeed display.
Copying cannot be resumed
until this step is performed.
A message may appear indicating the number of
originals which must be returned to the document
feeder tray. Return the originals to the document
feeder tray and press the [START] key (
).
MISFEED IN THE BYPASS TRAY
1 Carefully remove the misfed paper
from the bypass tray.
2 Grasp the side cover handle and
gently open and close the side cover.
The message " Clear paper
path." will be cleared and
copying will be possible.
If the message does not clear, check again
to make sure that no pieces of paper
remain.
Note