Sharp AR-M162 - Manual (Page 213)

84
PROGRAMMING
INITIAL PROCEDURE FOR ENTERING CHARACTERS
Entering alphabetical characters
(example: TPS)
1 Open the Rapid key overlay.
To switch between upper case letters and lower case
letters, press the [SHIFT] key.
2 Enter "T", "P" and "S" with the letter
keys.
The letters are stored and the cursor moves to the
space after the letters.
Entering numbers (example: 123)
1 Enter "1", "2", and "3" with the
numeric keys.
Entering symbols
1 Press the [SYMBOL] key.
2
Select the symbol that you wish to
enter with the [
][ ][ ][ ] keys.
To move to the next page, move the cursor to the
bottom line and press the [
] key. To move back to
the previous page, move the cursor to the top line and
press the [
] key. You can also change pages by
pressing the [ ] key when the cursor is at the right
end of the bottom line, or the [ ] key when the cursor
is at the left end of the top line.
3 Press the [OK] key.
The symbol selected with the cursor is entered and
you return to the character entry screen.
To change a character, press the [C] key.
The character directly to the left of the
cursor is cleared.
If the cursor is over a character, that
character is cleared.
• To change a character, press the [C]
key. The character directly to the left
of the cursor is cleared.
• If the cursor is over a character, that
character is cleared.
ENTER NAME
ABC
26 27 28 29 30
31 32 33 34 35
36 37 38 39 40
A B C D E
F G H I J
K L M N O
ENTER NAME
TPS
ABC
Note
ABC DEF
JKL GHI MNO
TUV PQRS WXYZ
@.-_ FUNCTION
ACC. #-C READ-END
OK
ENTER NAME
123
ABC
Note
If the Rapid key overlay is opened or closed
while a symbol is being selected, the symbol
currently selected with the cursor is entered
and you return to entry mode.
47 48 49 50
V W XYZ SP
REDIAL/PAUSE SPEED
SYMBOL
COMM. SETTING
SPACE/–
SYMBOL
! " # % & ' (
) + , - . / :
; < = > ? @ [ \
1/ 2
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
SYMBOL
! "
# % & ' (
) + , - . / :
; < = > ? @ [ \
1/ 2
GHI
OK BACK
ENTER NAME
#
ABC
Note