Sharp UX-300 User Manual

Page 70

Press the

* key to scroll through the

list from the most recent call, or the

key to scroll through the list from the
oldest call.

If you want to dial one of the numbers
in the list, scroll through the list until
the number appears in the display.

••••

If you want to send a fax, load the
document and then press the
START/MEMORY key.

••••

If you want to make a voice call,
pick up the handset or press the
SPEAKER key. Dialing will begin
automatically. (If you pressed the
SPEAKER key, pick up the handset
when the other party answers.)

Press the STOP key when you have
finished viewing the list.

START/MEMORY

STOP

To delete calls from the Caller ID list

If you want to delete a single call from the caller list, press the 0 key
while the call appears in the display. If you want to delete all calls
from the list, hold the 0 key down for at least 3 seconds while you are
viewing any number in the list.

Priority Call

If desired, you can set your fax to make a special ringing sound when
you receive a call from a designated phone number. This lets you
know immediately who is calling without having to look at the display.
To use this function, enter the desired phone number by following the
steps below (only one phone number can be entered).

Caller ID