Sharp UX-300 - Manual (Page 42)

4
Wait for the connection. Depending on
the setting of the receiving machine,
you will either hear a facsimile
reception tone or the other person will
answer.
••••
If the other party answers, ask them
to press their Start key (if you
pressed the SPEAKER key, pick up
the handset to speak with them).
This causes the receiving machine
to issue a reception tone.
5
When you hear the reception tone,
press the START/MEMORY key.
Replace the handset if you used it.
••••
When transmission is completed,
the fax will beep once.
Using the REDIAL key
You can press the REDIAL key to redial the last number dialed. To
send a document, proceed from Step 4 of Normal Dialing. Note that
the speaker will be automatically activated when you press the
REDIAL key.
START/MEMORY
Beep
Facsimile reception tone: This is a pronounced, high-pitched tone
that the receiving machine sends to the transmitting machine to
indicate that it is ready to receive.
Sending a Fax by Normal Dialing
40