Spalding 21166904 - Manual (Page 17)

17 10/04 P/N 21166904
24.
25
39
40
Insert spacer (45) through rim assembly (25). Place rim assembly on bracket (39) so that carriage bolt (41) is
inserted through hole on top of inner bracket (40). Install hex bolt (44), washers (27) and nut (42) through top
holes on bracket (39) through spacer (45) as shown.Tighten completely.
Install spring (28), concave washer (29) and
center lock nut (30) to carriage bolt (41) as
shown.
28
41
30
29
BOTTOM VIEW
45
25
41
Do not over tighten as rim will not flex
properly. See leveling instructions to
determine how much to tighten nuts
(42) and (30).
25.
44
27 27
45
42
NOTE
27