Soleus Air KC-45H - Manual (Page 13)

11
8. INSTALL THE AIR CONDITIONER IN THE
CASE
A. Slide the air conditioner into the case. Do not
push on the controls or the finned coils. Make
sure the air conditioner is firmly seated.
B. Reinstall the locking bracket and screw
removed earlier.
C. Reconnect the ground wire to the air
conditioner using the screw removed earlier.
IMPORTANT: The ground wire must be
reinstalled to ensure a proper ground.
D. Remove the front grille from its box and
remove the shipping tape.
E. Grasp the inlet grille at the bottom corners
and pull it forward. Unhook it from its top
hinges and set it aside.
F. Using the tab, pull up slightly on the filter to
release it and pull it down and out.
8. INSTALL THE AIR CONDITIONER IN THE
CASE (cont.)
G. Pull the coiled power cord from its shipped
position in the air discharge area. Attach the
front grille frame to the case by inserting the
tabs on the grille frame into the slots on the
front top of the case. Push the grille frame in.
And install the 2 side screws at bottom left
and right side of front panel.
H. Secure the front grille frame to the case with
one type C screw.
I. Reinstall the filter.
J. Reinstall the inlet grille. J Connect power.
Installation Instructions (Continuous)