Sound control, Basic ope ration, Volume control – Sharp CD-DP900E User Manual
Page 14: Extra bass (x-bass)/pre-programmed equaliser
14
CD-DP900E(UK)_1.fm
02/1/10
CD-DP900E
B
asic Ope
ration
- Sound c
ontr
o
l -
Sound control
Volume control
Press the VOLUME ( or ) button to increase or decrease the volume.
Extra bass (X-BASS)/Pre-programmed
equaliser
(Main unit operation)
You can select the extra bass and pre-programmed equaliser modes with the same
button on the main unit.
Changing the mode:
When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting
will be displayed. To change to a different mode, press the EQUALIZER/X-BASS/
DEMO button repeatedly until the desired sound mode appears.
(Remote control operation)
To enter or cancel the extra bass mode:
When the power is first turned on, the unit will enter the extra bass mode which
emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS button.
Selecting a pre-programmed equaliser mode:
When the EQUALIZER MODE button is pressed, the current mode setting will be dis-
played. To change to a different mode, press the EQUALIZER MODE button repeat-
edly until the desired sound mode appears.
Note:
If the EQUALIZER MODE button on the remote control is pressed in the extra bass
mode, it will be cancelled automatically.
0
1
2
29
30 MAXIMUM
.....
The sound is not modified.
Bass frequencies are emphasised.
Bass and treble are emphasised.
Bass and treble are slightly emphasised.
Treble is cut a little.
Treble is reduced a lot.
Vocals (midrange tones) are emphasised.
ROCK (X-BASS off)
X-BASS (X-BASS on)
FLAT (X-BASS off)
CLASSIC (X-BASS off)
POPS (X-BASS off)
JAZZ (X-BASS off)
VOCAL (X-BASS off)
FLAT
ROCK
POPS
JAZZ
CLASSIC
VOCAL