Sanyo AVP-4231 - Manual (Page 8)

Setup
1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.
Note:
< This product should be operated only from the type of power source indicated on the marking label.
< Always unplug the AC cord from power outlet when not using for a long period of time.
Plug into AC outlet.
Household
power outlet
6
AC cord
- AC INPUT COMP ONEN T INP UT 1
L R AUDIO COMP ONEN T INP UT 2 L R AUDIO S/P DIF
Power connection
Removing the Stand (for Wall-mount ONLY)
Cautions:
1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful
installation.
2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
being damaged.
3. Disconnect the AC power cord firstly.
Loosen the screws on the
Stand to remove the Stand.
Do not remove the stand from
the Display unless using an
optional bracket to mount it.
The appearance of the unit may
differ from the actual one.
To attach the stand, perform the
steps in reverse order.
Screws
Stand