Sanyo AVP-4231 - Manual (Page 19)

Memorizing the Channels
17
Selecting the Tuning Band
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.
Note: Be sure to select the TV source before operation.
Before your TV can memorize the available channels, you must specify the type of signal source that is connected
to the unit. (i.e., an antenna or cable system)
Auto Channel Search
Press MENU to display the menu main page.
1
Press repeatedly to select menu. 5 or 6 Setup
2
Press OK or to access the submenu. 4 3
Press OK or to select the Tuning Band. 4
Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.
h If using antenna, select Air;
If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cable
system. Normally please select Cable Auto
. (For further band information, contact your cable service
provider.)
4
Press to select . 5 or 6 Tuning Band item
5
Navigate to the Setup sub-menu and highlight Auto Ch Search.
1
2
Press OK or to begin the auto channel search.
The unit will automatically search for all available TV/DTV (if
using antenna), CATV/CADTV (if using cable) program.
4
Manual Channel Set
Navigate to the Setup sub-menu and highlight Manual Ch Set.
1
2
Press OK or to open Manual Channel Set Menu sub-menu. 4
After setting channels into memory, you can add or delete channels
from the default channel list as follows:
3
Use to select , 5 or6 button a channel then press the OK button
to add or delete the channel.
4
Press EXIT button to exit.
Now when you use CH+/- button to cycle among the channels,
the deleted channels can not be selected.
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move To Select To Exit
Audio
Setup
Feature
OK Exit
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move To Select To Exit
Audio
Setup
Feature
OK Exit
Autoprogram Menu
NTSC Channel 12
Channels Found
Progress (%)
Found
3
7
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move To Select To Exit
Audio
Setup
Feature
OK Exit
Note: If you want to stop the auto-search, press EXIT button.
Digital (CADTV) cable systems may cause several
unviewable channels to be memorized.
Use to select , 5 or6 button a channel then press the OK button
to add or delete the channel.