Sony KD-34XBR970 - Manual (Page 46)

39
M
e
nus
SE
TUP
Menu
s
SE
TUP
Menu
s
SETU
P
KD-34XBR970
2-671-222-21(1)
Using the Screen Settings
Selecting Screen
Mode Options The Screen Settings include the following options:
To access the Screen Settings, follow these steps:
Press V / v to highlight.
Press to select.
1. Display Menu 2. Highlight and
select
3. Highlight and
select
Antenna
Screen
Screen Mode Wide Zoom
Audo Wide On
4:3 Default Off
Vertical Center 0
Vertical Size 0
Exit: MENU
Option Description
Screen Mode Enables you to change the picture size for both standard-
definition (480i/480p) and high-definition (720p/1080i) sources.
For 480i/480p
sources Select from: Wide Zoom , Normal , Full , Zoom .
For details, see page 30.
For 720p/1080i
sources Select from: Full , Zoom , Horizontal Expand ,
Vertical Expand . For details, see page 31.
✍
In some cases, wide-screen programs will be shown in
aspect ratios that require the display of bars at the top and
bottom of your 16:9 screen. For more details, see page 52.
Auto Wide On Select to have the screen automatically
change to the screen mode that is best for
the current program. If frequent screen
changes are disturbing to you, select
Off .
Off Select to turn off the Auto Wide option.
Choose a screen mode from the Wide Mode
option.
4:3 Default Select the default Screen Mode to use for 4:3 sources.
To select a Screen Mode to use when channels or inputs are
changed, select from:
Wide Zoom , Normal , Full , Zoom . For
details, see page 30.
To continue using the current Screen Mode setting when the
channel or input is changed, select
Off .
Vertical Center Allows you to move the position of the picture up and down
in the window. (Available only in Wide Zoom and Zoom
modes.)
Press
V or v and press to choose a correction between
+15 and -15 (Zoom mode), and +5 and -5 (Wide Zoom mode).
Vertical Size Allows you to adjust the vertical size of the picture.
(Available only in Wide Zoom and Zoom modes.)
Press
V or v and press to choose a correction between
+7 and -7.
You can also change the
Screen Mode using the
SCREEN MODE button on the
remote control.
4:3 Default is only available
if Auto Wide is set to On.
z