Sony KD-34XBR970 - Manual (Page 19)

12
SE
TUP
SE
TUP
SETUP
SET
U
P
Setu
p
SETU
P
KD-34XBR970
2-671-222-21(1)
Satellite Receiver
and VCR To connect a satellite receiver and VCR
1 Connect the CATV cable or Antenna to the single (input) jack of
the splitter.
2 Use a coaxial cable to connect one of the splitter’s two output
jacks to the TV’s VHF/UHF jack.
3 Use a coaxial cable to connect the splitter’s other output jack to
the satellite receiver’s VHF/UHF input jack.
4 Connect the satellite antenna cable to the satellite receiver’s
satellite input jack.
5 Use a coaxial cable to connect the satellite receiver’s VHF/UHF
output jack to the VCR’s VHF/UHF input jack.
6 Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the TV’s A/V input jacks.
7 Use an A/V cable to connect the VCR’s A/V output jacks to the
TV’s A/V input jacks.
8 Run Auto Program, as described in “Setting Up the Channel List”
on page 20.
Using
S VIDEO jacks?
See page 7.
DIGITAL
AUDIO
OUT
DIGITAL
AUDIO
OUT
7
PCM/ PCM/
DOLBY DIGIT
DOLBY DIGITAL AL
A/V cable
Coaxial
cable
cable/antenna
CATV
TV
VCR
Satellite receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Coaxial
cable
Coaxial
cable
A/V cable
Splitter
(not supplied)
Satellite antenna cable