Siemens SC9000 - Manual (Page 3)

DU-DR-0019-SC9000 Rev A 6/4/02 GCX Corp. Page 3 of 3
Cleaning
1) The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in the hospital
environment (e.g. diluted bleach, ammonia, or alcohol solutions).
2) The surface finish will be permanently damaged by strong chemicals and solvents such as acetone and
trichloroethylene.
3) Steel wool or other abrasive material should never be used.
4) Damage caused by the use of unapproved substances or processes will not be warranted. To verify compatibility,
It is recommended that any cleaning solution be tested on a small area of the arm that is not visible.
5) Never submerge the mounting arm. Wipe any cleaning agents off of the arm immediately, using a water-dampened
cloth. Dry the arm thoroughly after cleaning.
CAUTION: GCX makes no claims regarding the efficacy of the listed chemicals or processes as a means for controlling
infection. Consult your hospital’s infection control officer or epidemiologist. To clean or sterilize mounted devices or
accessory equipment, refer to the specific instructions supplied with those products.
PARTS LIST
GCX P/N Siemens P/N Dräger P/N DESCRIPTION
DR-0021-07
DR-0025-81
4720095
MM15690
6870777
6870776
6870841 RS Top Shelf Pan w/ tilt swivel
Siemens Power Supply Holster
Vamos – RSHousing Mounting Kit w/10” Arm
Vamos – Adaptor Plate
Vamos – Power Supply Holster, rail mounted