Siemens SC9000 - Manual (Page 2)

DU-DR-0019-SC9000 Rev A 6/4/02 GCX Corp. Page 2 of 3
Install Power Supply Mounting Adapter to Siemens Power Supply Mount (Siemens P/N: 4720095)
1) Install according to the instructions included with the adapter.
Insert Power Supply
1) Align the Slide of the mount with edge of the Channel insert into channel.
INSTRUCTIONS FOR USE – Low Profile Tilt Swivel Mount
Swivel
1) To rotate, simply push or pull the corners of the device.
2) To adjust the tension of the swivel action, tighten or loosen the swivel adjustment screw.
Tilt
1) Grasp the top and bottom of the device and tilt to the desired angle.
2) Adjust the overall tilting tension by evenly tightening or loosening the #8-32 X 1/2” SHCS - (Tension Adjustment
Screw) with the hex key provided.