Sony SLV-D980P - Manual (Page 63)

63 Screen Setup
D
V
D Se
ttings
and
Adjus
tme
nts
Tip
• The “Progressive” setting can be canceled in stop mode by pressing X on the unit
continuously for 5 seconds or more, or selecting “Off” in step 2.
Note
• If you select progressive signal when you connect the DVD player to a TV that cannot accept
the signal in progressive format, the image quality will deteriorate. In this case, set
“Progressive” to “Off.”
3 Follow the instructions appearing on the screen.
1 Ensure your TV is (525P/625P) Progressive Scan
capable.
2 Connect with Component Video Output jacks
(red/green/blue connections).
see “Use this hookup if your TV has component
video input jacks” on page 56.
3 Press B/b to select [OK] to test your video
signal.
4 If video signal appears OK, video connection is
complete. Press ENTER.
The PROGRESSIVE indicator on the unit lights up
in orange.
If picture is distorted, press O RETURN.
Check the connection (page 56).
5 Press SET UP to exit the menu.
Progressive Scan Output
1) Connect with Component Video
Output jacks.
2) Select [OK] to test your video signal.
3) If video signal appears OK,
video connection is complete.
RETURN
SCREEN SETUP
ENTER SET UP b B
OK CANCEL
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key.
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] button on the product for 5 seconds.
RETURN
SCREEN SETUP
ENTER
DVD LINE1 RGB Out
TV Type
DVD S-Video Out
RETURN
SCREEN SETUP
SET UP v V b B
[ Off ]
DVD Component Out [ On ]
Progressive [ On ]
[ Off ]
[ 4:3 Letter Box ]