Sony SLV-D980P - Manual (Page 109)

109 Troubleshooting
Ad
d
itiona
l In
fo
rm
ation
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony
service facility.
General Troubleshooting
Symptom Remedy
Po
w
e
r
The ?/1 (on/standby) switch does
not function. • Connect the mains lead to the mains securely.
The power is turned on but the DVD-
VCR does not operate. • Moisture condensation has occurred. Turn the power off,
unplug the mains lead and leave the DVD-VCR to dry for
over three hours.
Cl
oc
k The clock has stopped and “--:--”
appears in the display window. • The clock stops if the DVD-VCR is disconnected from
the mains. Reset the clock (and timer).
Ot
he
rs
The remote commander does not
function. • Make sure you are pointing the remote commander at the
remote sensor on the DVD-VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the TV / DVD·VIDEO switch is set correctly.
• Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
The tracking meter does not appear
on the screen. • The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other TVs. • Set your TV’s code number. The code number may
change when you replace the batteries of the remote
commander.
continued