SanDisk Wireless LAN Card - Manual (Page 22)

Page 18
Link
The Link tab includes fields for checking the point-to-point data transmission
between Pocket PCs or between a Pocket PC and an access point.
3. Select a Packet Size. The packet size is the amount of the test data that the
card sends to the device being tested.
4. Tap Start to begin the test.
5. Tap Stop to end the test.
Test Result
The Test Result area displays the IP Address of your Pocket PC, the number
of packets sent and received, and the elapsed time of the test.
Link Message
The Link Message area displays the results of the test. The reply from a
wireless device or access point associated with the IP address entered in the
Ping Command area is listed.
Ping Command
The Ping Command enables you to
check whether another wireless device
or access point is available.
1. Enter the IP address of a wireless
device or access point.
2. Select a Timeout period. The Timeout
period is time (in milliseconds) that
the card waits for an answer from the
host being tested. If the timeout is set
to 1000 milliseconds and the card
does not receive a response back
within that time, the device is
determined to be unreachable.