Sirius Satellite Radio Orbiter SR4000 User Manual

Page 12

Orbiter SR4000 User Guide

Memory Options

In this mode, the user can turn the Memory Search
Function (S-Seek) ON or OFF. In addition, all 30
Preset Memory Locations can be cleared. To change
the Memory Options, use the following procedure while
in the “Menu Options” List mode:
1. Use the Rotary Knob to highlight the “Memory

Options”. Press the Rotary Knob to select.

2. Select one of the following Memory Options:

a. Automatic Memory Search function - On or Off:

Use the Rotary Knob to select between the 2 options
by highlighting the desired selection. Then press the
Rotary Knob to enter the option.

b. Clear All Memory Locations: Press and release

the Rotary Knob; a prompt display screen appears
confirming - Clear All Memory Select “Yes” or
“No” and press the Rotary Knob.

To exit this function, press the Rotary Knob or MENU
button. No button activity for 10 seconds will also exit
this function.

• Time Zone: Since the Clock adjusts the time

automatically, it is important to specify your
proper time zone. Use the Rotary Knob to
select the proper time zone. The following is a
list of time zones included:

(GMT-9:00) Alaska
(GMT-8:00) Pacific
(GMT-7:00) Mountain
(GMT-6:00) Central
(GMT-5:00) Eastern
(GMT-4:00) Atlantic (GMT-3:30)
Newfoundland (Abbreviated as Newfndlnd)

• Daylight Savings Time (DST) Observance:

Activate this function if your area is subject to
DST; turn the Rotary Encoder to toggle
between DST Observed (default) or DST Not
Observed.

b. Alarm Clock: When this menu option is

highlighted and selected, you will be able to set
the unit to turn on at a specific time. The last
selected channel prior to shutdown will be
present when the Alarm feature is activated.
Alarm appears on the first line of the display
followed by the alarm options:

• Set Alarm: Use the Rotary Knob to select “Set

Alarm” From the Alarm Clock Menu. Select either
“Alarm Off” (Default) or “Alarm On” from the Menu
and press the Rotary Knob to set alarm status.

• Alarm Time: Use the Rotary Knob to select “Alarm

Time” from the Alarm Clock Menu. Rotate the
Rotary Knob to set the time you want the SR4000
Receiver to activate (Default is 12:00pm). Press the
Rotary knob to store the Alarm Time.

c. Program Alert: When this menu option is

highlighted and selected, you will be able to program
the unit to switch to a selected channel at a specific
time. Press the Rotary Knob to enter the Program
Alert Menu, The following adjustment options are
available:

• Program Time/Day: Turning the Rotary Knob

toggles between Time and Day. If Time is selected,
use the Navigation Wheel increase (CW) or
decrease (CCW) the set time in a circular motion
on one line in the middle of the display from the
default value (12:00pm). AM or PM will switch
automatically when the AM or PM threshold has

Continued on Next Page

Time-Based Features

This Menu Option allows for adjustments of the
following items:

Clock

Auto Shutdown

Alarm Clock

Sleep Mode

Program Alert

To change the Time-Based Features, use the
following procedure while in the “Menu Options”
List mode:
1. Use the Rotary Knob to highlight the “Time-Based

Features”. Press the Rotary Knob to select.

2. Use the Rotary Knob to select one of the following

Time-Based Features to adjust:

a. Clock: When entering this menu option, you can

setup the clock shown on the default display, based
on the format desired, and the time zone in which
you reside. The clock data is provided via the Sirius
Satellite data stream, and will update based on the
received signal.

• Format: The Clock Format option allows for

either 12 Hour (Default), or 24 Hour display
options. Use the Rotary Knob to select the desired
format.