beautypg.com

Above-floor cleaning, With floor nozzle – Shark NAVIGATOR NV350W User Manual

Page 11

background image

TOLL FREE: 1-800-798-7398

11

www.sharkclean.com

Above-Floor Cleaning

CLEAN THE FLOOR IN DETACHABLE CANISTER
MODE

1

Press the extension wand release button and pull
the extension wand

up.

2

A

ttach the motorized floor nozzle onto the end of

the extension wand. (Fig. 15)

3

Pr

ess the On/Off switch to the “I” position to turn

the suction motor

on.

NOTE: The rotating brush will not rotate in
Detachable Canister mode.

With Floor Nozzle

CLEAN ABOVE THE FLOOR IN UPRIGHT VAC OR
DETACHABLE CANISTER MODE

1

Press the handle release button and pull the
handle up or press the extension wand release
button and pull the extension wand up.

2

Attach desired accessory onto the end of either
the extension wand or the handle. (Fig. 14)

3

Your vacuum has tremendous suction
power. Adjust the amount of suction with
the suction release on the handle. Open
the valve (a) by rotating the collar 90
˚
counterclockwise for low suction when
doing light jobs such as drapes or fine
surfaces. Close the valve (a) by rotating
the collar clockwise 90
˚ for high suction
and when using the hand held turbo brush.

(Fig. 14)

4

Press the On/Off switch to the “I” position to turn
the vacuum on for above-floor cleaning.

IMPORTANT: Ensure vacuum is in upright

position. Do not use position “II” when cleaning
above the floor in the upright vac mode as this
will engage the motorized floor brush. The
rotating brush may damage your floor if run for a
prolonged period of time in one area.

Fig. 15

Fig. 14

Suction

Release Collar

a

Release suction
for easier push &
pull on high pile
carpets and area
rugs.

NV350W_26_IB_ENG_101201.indd 11

10-12-01 3:18 PM