Siemens GSM 900 - Manual (Page 58)

31.5.02 06-S46 Body.fm i 37 Eagle Am Engl, A31008-H4500-A1-4-7619
53
Call Forward © Z
You can set the conditions for which
calls are forwarded to your mailbox
or other numbers.
§Menu§ Call Forward
Set call forwarding as follows:
In GSM mode, there are several
settings for call forwarding.
§Menu§ Call Forward
…
Unanswered
Select.
§Select§ Select soft key.
Set Select.
J
Enter the phone number
to which the call will be
forwarded.
or
T
Select a number from
the address book or
select
§Mailbox§ .
§OK§ Confirmation. After a
short pause, the setting
is confirmed by the
network.
All calls
Forwards all calls to selected number.
p
Icon appears in the top
line of the display in
standby mode.
Unanswered
This setting covers the most common
conditions. Others include:
Not reachable, No accept, Busy
Specific Call Forward
Not reachable
Forward if the phone is switched off
or out of range.
No accept
A call is only forwarded after a delay
(depends on the network). The
period may be set by the user to a
maximum of 30 seconds in intervals
of 5 seconds.
Busy
Forward an incoming call.
Receiving fax
Fax calls are forwarded to a number
with a fax connection.
Receiving data
Data calls are forwarded to a phone
number with a PC connection.
Exception: If Call waiting is activated
(p. 81), you will hear the call waiting tone
during a call (p. 20).
To use call forwarding in
œ
mode:
Press
* 7 1
, then 1 + area code +
phone number to which you want incoming
calls forwarded.
Press
,
to activate. You will hear
confirmation tones. Press
-
.
To deactivate:
Press
* 7 1 0
.
Press
,
. You will hear confirmation
tones. Press
-
.