Sharp VL Z 1 H - Manual (Page 33)

Basic Operations
21
Power Standby Mode
Power Standby mode allows you to prevent
accidental recording by locking all
operations except cancelling the mode.
Hold down the STANDBY button for more
than 2 seconds when you pause record-
ing.
• The screen turns off and the STANDBY
indicator lights up.
To resume operation
Turning on/off the
Backlight
You can see the on-screen display outdoors
on a sunny day or in a location with bright
lighting even when the backlight turns off.
Also, this function is useful when watching
playback on a TV.
Hold down the LCD LAMP button for
more than 2 seconds to turn off the
backlight.
• “BACKLIGHT OFF” will flash for two seconds,
then H appears on the LCD screen.
To turn on the backlight
Press the LCD LAMP button.
Note:
• The BACKLIGHT OFF mode will cancel when
you close the LCD monitor. Press the STANDBY button again to
return to the Recording Standby mode.
• It takes about 2 seconds to be able to start
recording.
Notes:
• Power Standby will cancel and the STANDBY
indicator will turn off in these situations below:
— When the camcorder remains in Power
Standby mode more than 5 minutes
— When the camcorder is set to Playback
mode
— When removing the battery pack
— When removing a cassette
• The camcorder will turn off automatically in 5
minutes after setting Power Standby mode if
it remains in Recording Standby mode after
canceling Power Standby mode.
— When Power Standby mode, for example,
is cancelled after 3 minutes, the
camcorder will turn off if recording is not
started within 2 minutes.
STANDBY indicator
STANDBY button
LCD LAMP button