Sharp MD-MT866H - Manual (Page 40)

40
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
4
Move the right shuttle switch to
5 5 5 5 5
or
4 4 4 4 4
repeatedly to select the letter.
5
Press the right shuttle switch toward
“ENTER/SYNC” to enter it.
6
To enter more letters, repeat steps 3 - 5.
7
When the name has been completely en-
tered, press the EDIT button.
8
TOC will be displayed to write the updated
contents to the MiniDisc press the • ■ / :OFF
button.
● You cannot remove the MiniDisc whilst TOC is
displayed. TOC will not disappear until the re-
corded contents have been updated.
Advanced Features
– T
itling a MiniDisc –
Titling a MiniDisc
Creating disc and track names
One disc name and up to 255 track names can be created
per disc (A maximum of 100 characters for the disc and
each track name and a total of 1,700 characters can be
entered).
1
Whilst in the pause
mode, press the EDIT
button repeatedly to
select “DISC NAME”. Whilst in the pause
mode, press the EDIT
button repeatedly to
select “TRACK NAME”.
Disc name Track name
Position where the next letter will be entered 2
Press the right shuttle switch toward “ENTER/SYNC”.
● The unit will enter the character input mode.
● The MiniDisc lid will be locked, to cancel the
operation, press the •
■ / :OFF button.
3
Press the DISP button repeatedly to select
the type of characters.
● The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
Cursor
(Capital letters) (Lower-case letters) (Numbers and symbols)