Sharp MD-MT866H - Manual (Page 28)

28
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Useful Features
–
Advanced Recording –
Advanced Recording
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
Move the right shuttle switch to
5 5 5 5 5
or
4 4 4 4 4
to adjust the recording level.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
(See page 18,19)
● Select the starting point for your recording and
press the PAUSE button.
5
Press the right shuttle switch toward
“ENTER/SYNC”.
6
Begin playback on the stereo system.
Recording will begin automatically.
Playback sound-actuated recording
(Synchronised recording)
Recording automatically starts or pauses by detect-
ing sound from the stereo system (Synchronised
recording).
To interrupt recording:
● When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
● If a silence lasts for 3 seconds or more, the recording
will be paused (Pause function does not work for
approximately 10 seconds after a recording starts).
● When the unit receives sound again, recording automati-
cally starts.
● A new track number is created when the recording re-
sumes.