Star Trac SPINNER BIKE NXT 7000 - Manual (Page 7)

Page 6 of 9Star Trac Product Support 800-503-1221
Page 6 of 9
Pro & Elite Only
1) Slide the handlebar post into the frame making sure the holes
face the front of the bike.
2) Allow the post to go into the frame all the way in to level 1 and
align the pop pin so it snaps into the hole then tighten the pop pin
and test for steadiness.
3) Loosen the pop pin and raise the handlebar to its highest position
and tighten the pop pin and test for steadiness.