Sony CHC-TB20 - Manual (Page 27)

Optional Components
27 GB
Listening to audio from a
connected component
1
Connect the audio cords.
See “Hooking up optional components” on
page 26.
2
Press MD (VIDEO) to switch the
function to MD or VIDEO.
Start playing the connected component.
Notes
• Pressing FUNCTION and ?/1 while the power is
off automatically turns the power on and “VIDEO”
is selected as a function. When the system is in the
Power Saving Mode, this function does not work.
• If the sound is distorted or too loud when selecting
“VIDEO,” or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD.”
Recording on a connected
digital component
1
Connect the digital cable.
See “Hooking up optional components” on
page 26.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
Recording audio from a
connected component
1
Connect the audio cords.
See “Hooking up optional components” on
page 26.
2
Start recording manually.
See “Recording to a tape” on page 19.
Notes
• Pressing FUNCTION and ?/1 while the power is
off automatically turns the power on and “VIDEO”
is selected as a function. When the system is in the
Power Saving Mode, this function does not work.
• If the sound is distorted or too loud when selecting
“VIDEO,” or you want to switch back to “MD,”
repeat the operation described above to switch to
“MD.”