Sony CHC-TB20 - Manual (Page 16)

16 GB
Listening to the radio (continued)
Labeling the preset
stations
— Station Name
You can label each preset station with up to
14 characters (Station Name).
1
Tune in the preset radio station you
want to label (see “Listening to the
radio” on page 15).
2
Follow the same procedures as from
step 3 to 8 of “Labeling a CD” on page
11.
To cancel labeling
Press MENU/NO on the remote.
To erase the name
1 Tune in the station.
2 Press NAME EDIT/CHARACTER on the
remote.
3 Press CLEAR on the remote repeatedly to
erase the name.
4 Press ENTER/YES.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
REPEAT/FM MODE repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
• To tune in automatically, press PLAY MODE/
TUNING MODE repeatedly until “AUTO” appears
in step 2 above, then slide the knob to m or to
M (or press m or M on the remote). The
frequency indication changes and scanning stops
when the system tunes in a station (Automatic
Tuning).