Plugging in the power, Connecting to the computer – Samsung SF 4700 User Manual

Page 19

1.12

Getting Started

Plugging In the Power

Plug one end of the cord into the back of the machine and the other end

into a standard AC power outlet.

The SF-4700 will turn on and the display will show ‘POWERING UP

PLEASE WAIT’. If there is no cartridge installed, the display will show

‘ADD CARTRIDGES’.

Connecting to the Computer

The SF-4700 Series has a parallel interface port which allows use with a

Windows PC.

1. Plug the supplied parallel printer cable into the connector on the back

of the SF-4700. Push the metal clips down to fit inside the notches on

the cable plug.

2. Connect the other end of the cable to the parallel interface port on

your computer. See your computer documentation for more

information.

To AC outlet

To turn off, unplug the power cord.