Shindaiwa 68006-94310 - Manual (Page 6)

6
Inspection and Maintenance

Before performing any inspection,
maintenance, repair or cleaning
of the unit, make sure engine
and cut-off wheel are completely
stopped and cooled down.

Inspection and maintenance
operations should be done in a
well ventilated location and where
there are no combustibles nearby.

When replacing parts, always use
Shindaiwa genuine parts. Using
non-Shindaiwa genuine parts may
result in serious injury.

Inspection and maintenance
operations not mentioned in this
manual should be performed by
an authorized Shindaiwa dealer.
Transport and Storage

When carrying the unit, make
sure engine and cut-off wheel are
completely stopped.

Carry the unit with the front
handle and with cut-off wheel fac-
ing rearward.

When storing the unit, make sure
the cut-off wheel is removed and
the unit is placed on a secure, dry
place.

Keep the unit away from children.

When storing the unit for more
than a few days, empty the fuel
tank completely.

Store gasoline and mixed fuel in
a closed, dry place and where
combustibles are not nearby.
WARNING!
Safety Precautions (continued)
Operation (continued)

If you discover fuel leakage, im-
mediately stop the engine.

Cutting may cause sparks from
the cut-off wheel. Make sure
there is no flammable substanc-
es nearby.

Never cut live electrical wires.
The shock you might receive
could be very serious.

Do not touch hot parts such
as the muffler or cylinder. You
could burn yourself severely.

The cut-off wheel gets hot while
cutting. Never touch the wheel
immediately after cutting. You
could burn yourself severely.

While the engine is running,
never touch high voltage parts
such as the spark plug cap and
plug cord.
Stopping The Engine

The cut-off wheel coasts for
a while after the engine is
stopped. Keep hold of the unit
firmly until the wheel stops com-
pletely and then place it on the
ground.