beautypg.com

Troubleshooting – Shindaiwa 68006-94310 User Manual

Page 24

background image

24

The engine does not start.

PROBLEM

Remove the spark plug (pg 13).

Is the spark �

plug wet?

Cutting performance is poor.

PROBLEM

Make sure the choke is �

pushed fully in.

Make sure the air �

cleaner is clean (pg 17).

Make sure the drive belt is �

properly tightened (pg 19).

Make sure the carburetor is �

is properly adjusted (pg 18).

Make sure the cut-off wheel is

appropriate for your work.

Make sure the diamond �

wheel is sharp.

Dry the �

spark plug.

Inspect the

spark plug �

(pg 19).

Pull the recoil

starter several

times to

remove fuel

from the

cylinder.

If the above inspections and maintenance procedures do not �

correct the problem, contact your Shindaiwa dealer for assistance.

Make sure the fuel tank contains

with clean, fresh fuel (pg 11).

Is the spark �

plug dry?

Replace the �

fuel filter �

(pg 22).

Troubleshooting

This manual is related to the following products: