Sony D-T405 - Manual (Page 36)

35
Playing a CD in a car
L
You can use your Discman in a car.
To connect your Discman to a car
cassette deck, you need the following
accessories:
• Mount kit CPM-450PC/CPM-300PC
(Mount plate + Car battery cord +
Car connecting pack)
or
• Car battery cord DCC-E245 and Car
connecting pack CPA-8/CPA-9
Refer to the instruction manual of each
accessory for details.
When you use the mount kit
(CPM-450PC or the equivalent)
Attach the car mount adaptor supplied
to the mount plate before installing the
Discman.
Switched ignition function
With this feature, your Discman stops
automatically when you turn off the
engine of the car. (This function is not
possible with some cars depending on
the model.)
Using the supplied
remote control M
You can use the remote control as the
wired remote control.
When you are not using the remote
control, slide HOLD in the direction of
the arrow.
To unlock, slide HOLD back.
z Radio Operations
Listening to the radio
N
Connect the headphones to the remote
control firmly. Then, connect the AC
plug adaptor to the DC IN 4.5 V jack of
the Discman and the wall outlet.
1
Set the CD/RADIO switch to
“RADIO.”
2
Press BAND until the band you
want appears
Each time you press the button,
the display changes: FM1 n FM2
n FM3 n FM4 n FM5 n AM.
3
Press TUNING +/– to tune in the
station you want and adjust the
volume.
To turn off the radio
Set the CD/RADIO switch to “CD
(RADIO OFF).”
To tune in the station quickly
Hold down TUNING +/– in step 3
until the frequency digits begin to
change in the display. The Discman
automatically scans the radio
frequencies and stops when it finds a
clear station.
To improve broadcast
reception
For FM, extend the headphones cord.
For AM, reorient the Discman itself.
When listening to the radio on
dry batteries or rechargeable
battery
If you connect the external power
source plug to the DC IN 4.5 V jack of
your Discman, the radio station will
change to the initial one (default).
Tune in the station again to continue
listening to it.